Tuesday, December 26, 2017

Update Cisco CCIE 400-101 study guide

If you have any questions about the exam, Passtcert Cisco CCIE 400-101 study guide will help you to solve them. Within a year, we provide free updates. Please pay more attention to our website.All the IT professionals are familiar with the Cisco 400-101 exam. And all of you dream of owning the most demanding certification. So that you can get the career you want, and can achieve your dreams. With Passtcert Cisco CCIE 400-101 study guide, you can get what you want.

If you choose to sign up to participate in Cisco certification 400-101 exams, you should choose Cisco CCIE 400-101 study guide to prepare for the examination right now. Because Cisco certification 400-101 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.Each IT person is working hard for promotion and salary increases. It is also a reflection of the pressure of modern society. We should use the strength to prove ourselves. Participate in the Cisco 400-101 exam please.


Share some CCIE 400-101 exam questions and answers below.
Which mechanism does GET VPN use to preserve IP header information? 
A. IPsec tunnel mode 
B. GRE 
C. MPLS 
D. IPsec transport mode 
Answer: A

Which statement is true about LLDP? 
A. LLDP provides VTP support. 
B. LLDP does not use a multicast address to communicate. 
C. LLDP can indicate only the duplex setting of a link, and not the speed capabilities. 
D. LLDP does not support native VLAN indication. 
Answer: D

Which information is contained in an OSPF Type 7 Not-So-Stubby Area NSSA External LSA? 
A. The paths and costs to all OSPF NSSA areas that are external to the current area. 
B. The path and costs to reach other stub area border routers in the OSPF routing domain. 
C. The address of routers that connect the current area to other areas and the cost to reach those routers. 
D. External network address, mask, and cost to reach each network that is external to the OSPF domain and only within the NSSA 
E. The external network address, mask, and cost to reach networks that are external to the OSPF NSSA, including the default route. 
Answer: D

Refer to the exhibit. 



Which two conclusions can you draw from this output (choose two) 
A. The device at the 192.168.5.119 routing table has an APR entry for the device at 10.9.132.254. 
B. The packet was source-routed. 
C. The device at 192.168.5.119 is on the same subnet as the next hop for the device at 10.9.132.254. 
D. The device that produced the output uses different interfaces to send and receive traffic to and from the device at 10.9.132.254 
E. The device that produced the output uses the same interface to send and receive traffic to and from the device at 10.9.132.254 
Answer: C, E

How does an IPv6 host automatically generate a global address? 
A. It prepends its interface identifier to the network prefixes contained in Router Advertisement messages. 
B. It appends its interface identifier to the network prefixes contained in Router Advertisement messages. 
C. It appends its interface identifier to the network prefixes contained in Router Solicitation messages. 
D. It prepends its interface identifier to the network prefixes contained in Router Solicitation messages. 
Answer: B

Which two statements about route redistribution default metrics are true? (Choose two) 
A. When EIGRP is redistributed into OSPF as E2, it has a default metric of 20. 
B. When an IGP is redistributed into RIP, it has a default metric of 1. 
C. When an IGP is redistributed into OSPF, it has a default metric of 110. 
D. When an IGP is redistributed into IS-IS, it has a default metric of 115. 
E. When an BGP is redistributed into OSPF, it has a default metric of 1. 
Answer: A, E

A packet from network 10.0.1.0/24 destined for network 10.0.2.0/24 arrives at R1 on interface Gi0/0, but the router drops the packet instead of transmitting it out interface Gi0/1.Which feature that is configured on R1 can cause this problem? 
A. UDLC 
B. split horizon 
C. uRPF 
D. spanning tree 
Answer: C

The OSPF adjacency between two routers cannot be established.What is the root cause of the problem? 
A. Both routers are designated routers. 
B. different area ID 
C. mismatched OSPF network types 
D. authentication error 
E. area type mismatch 
Answer: E

Drag and drop the MPLS term on the left to the function it performs on the right. 



Answer: 




Which feature can be used to block traffic from one host to another within one VLAN on a Layer 2 switch? 
A. port security 
B. dot1x 
C. access list 
D. protected ports 
Answer: D

Never say you can not do it. This is my advice to everyone. Even if you think that you can not pass the demanding Cisco 400-101 exam. You can find a quick and convenient training tool to help you. Passtcert Cisco CCIE 400-101 study guide is a very good training materials. It can help you to pass the exam successfully. And its price is very reasonable, you will benefit from it. So do not say you can't. You only need to select the appropriate training materials. Passtcert Cisco CCIE 400-101 study guide is the best training materials.

No comments:

Post a Comment